BlueLine
Balken
INDUSTRIAL CUTTERS

 


Cutters for Trade and Industry

 

 

LÖWE 5.105

Small anvil pruner with a surprising performance for cutting wood, plastic, rubber and similar material. All parts separately available and easily to replace. Length of cut: 25 mm.

Beschreibung
LÖWE 5.104

LÖWE 1.105

Anvil pruner with bent end of handle for a better handling of the cutter when shore up against a steady ground.

Beschreibung
LÖWE 1.105

LÖWE 3.105

Anvil cutter as item 1.105, but with a cutting length of 50 mm.

Beschreibung
LÖWE 3.105

LÖWE 3.305

Anvil cutter with 75mm length of cut.
Beschreibung
LÖWE 3.305

LÖWE 3.101

Mitre cutter as item 3.104 with stop faces at 45°, but without plastic handle covers.

Beschreibung
LÖWE 3.101

LÖWE 3.104

Mitre cutter with stop faces at 45° an marks for 15°, 30° and 90°. A must where strips and profiles of plastic, rubber or wood are cut for mitering. All parts separately available and easy to replace.
Beschreibung
LÖWE 3.104

LÖWE 3.105

Anvil cutter as item 1.105, but with 50mm length of cut.

Beschreibung
LÖWE 3.105

LÖWE 3.106

Slat cutter with stop faces at 90°.

Beschreibung
LÖWE 3.106

LÖWE 3.106/50K

Slat cutter with stop faces at 90°, 50 mm length of cut. Slat cutter as item 3.106, but with plastic underlayment.

Beschreibung
LÖWE 3.106/50K

LÖWE 3.104/HÜ

Mitre cutter as item 3.104 but with leverage for hard materials. Very easy cutting effect.

Beschreibung
LÖWE 3.104/HÜ

LÖWE 3.105/HÜ

Anvil cutter with leverage , 50 mm length of cut.

Beschreibung
LÖWE 3.105/HÜ

LÖWE 3.106/HÜ

Slat cutter as item 3.106, but with leverage, with stop faces at 90°.

Beschreibung
LÖWE 3.106/HÜ

LÖWE 3.304

Mitre cutter with stop faces at 45°, 75 mm length of cut.

Beschreibung
LÖWE 3.304

LÖWE 3.305

Anvil cutter without stop faces, 75 mm length of cut.

Beschreibung
LÖWE 3.305

LÖWE 3.306

Slat cutter with stop faces at 90°, 75 mm length of cut.

Beschreibung
LÖWE 3.306

LÖWE 3.304/HÜ

Mitre cutter with leverage and stop faces at 45°, 75 mm length of cut.

Beschreibung
LÖWE 3.304/HÜ

LÖWE 3.305/HÜ

Anvil cutter with leverage, 75 mm length of cut.

Beschreibung
LÖWE 3.305/HÜ

LÖWE 3.306/HÜ

Slat cutter with leverage and stop faces at 90°, 75 mm length of cut.

Beschreibung
LÖWe 3.306/HÜ

LÖWE 3.604

Cable duct cutters were developed for cutting cable ducts and plastic strips. The easy cutting effect is achieved by a special cutting geometry. With stop faces at 45° and 90°, 75 mm length of cut.

Beschreibung
LÖWE 3.604

LÖWE 3.605

Cable duct cutter as item 3.604, but without stop faces, 75 mm length of cut.

Beschreibung
LÖWE 3.605

LÖWE 3.606

Cable duct cutter as item 3.604, but with stop faces at 90°.

Beschreibung
LÖWE 3.606

LÖWE 3.604/HÜ

Cable duct cutter as item 3.604, but with leverage for easier cutting.

Beschreibung
LÖWE 3.604/HÜ

LÖWE 3.605/HÜ

Cable duct cutter 3.605, but with leverage for easier cutting.

Beschreibung
LÖWE 3.605/HÜ

LÖWE 3.606/HÜ

Cable duct cutter as item 3.606, but with leverage for easier cutting.

Beschreibung
LÖWE 3.606/HÜ

LÖWE 5504

Suited to rubber hoses and corrugated tubing. Material is not crushed thanks to the ability of the pointed blade to plunge precisely into the material.

Beschreibung
LÖWE 5504

LÖWE 3.204/P90

Tube and Hose cutter for the easy and clean cutting of plastic box profiles up to 25 x 45 mm and rigid or thick walled plastic tubes up to 32 mm Ø. 

Beschreibung
LÖWE 3.204/P90

LÖWE 5.104/P90

Tube and Hose cutter for the easy and clean cutting of plastic box profiles up to 25 x 45 mm and rigid or thick walled plastic tubes up to 32 mm Ø. 

Beschreibung
LÖWE 5.104/P90

3.204/16u19


Tube cutter for easy cutting of plastic tubes with 16 and 19 mm Ø. Cuts without burs.

Beschreibung
LÖWE 3.204/16u19

LÖWE 3.704/16u19

Tube cutter for cable conduits with diameters of 16 and 19 mm. The tube is cut without damaging the cable. The cable can be cut in the rear part of the opening.

Beschreibung
LÖWE 3.704/16u19

LÖWE 3.804

Mitre cutter with trapezoidal blade, with stop faces at 45° and 50 mm length of cut.

Beschreibung
LÖWE 3.804

LÖWE 3.805

Anvil cutter with trapezoidal blade, without stop faces and 50 mm length of cut.

Beschreibung
LÖWE 3.805

LÖWE 3.806

Flat ribbon cable cutter with trapezoidal blade, stop faces at 90° and 50 mm length of cut. 

Beschreibung
LÖWE 3.806

LÖWE 4.104/v

Cutter for sealing profiles at windows and doors V-cut.

Beschreibung
LÖWE 4.104/v
LÖWE 4104/y

Cutter for Y-cut.

Beschreibung
LÖWE 4104/y

LÖWE 4104/vr

Cutter for V-cut, with draw-in roller.

Beschreibung
LÖWE 4104/VR
LÖWE 4104/yr

Cutter for Y-cut, with draw-in roller.

Beschreibung
LÖWE 4104/yr

LÖWE 4204

Cutter for A-cut.

Beschreibung

Lever cutter LÖWE 50.130

130 mm length of cut, alternatively with stop faces for 45° or 90°. Anvl lever cutter for clean and precise cut in larger dimension slats, plastic profiles and many materials more.  

Beschreibung
Löwe 50.130
Balken